The LZO film grown on CeO2-seed and CeO2/YSZ/CeO2 buffered NiW tapes shows pure c-axis orientation as only (004) reflection of the LZO film, and no LZO (222) peak is observed. This indicates that LZO film is preferentially oriented with the c-axis

perpendicular to the substrate surface and has an excellent crystallinity. However, small LZO (222) peak is detected in the LZO sample grown on YSZ/CeO2 buffered NiW tape, which resulted from the minority misoriented grains in LZO films. These misoriented grains are grown on top of randomly oriented grains in the NiW substrate or formed by coalesced larger droplets. The out-of-plane and in-plane epitaxial orientations of LZO films are confirmed using ω-scan and φ-scan XRD measurements. Table 1 shows out-of-plane and in-plane textures of LZO films grown on three different buffered NiW tapes. From GDC-0941 supplier the

I-BET-762 order texture analysis data, it can be seen that the LZO film prepared on the CeO2-seed buffered NiW tape has the best out-of-plane texture of ∆ ω = 3.4° and the in-plane texture of ∆ φ = 5.5°. The out-of-plane texture PU-H71 and in-plane texture of the YSZ buffer layer are ∆ ω = 4.2° and ∆ φ = 7.2°, respectively. The rocking curves and pole figure of the LZO film fabricated on the CeO2-seed buffered NiW tape are shown in Figure 2. The FWHM values of both ω-scan and φ-scan rocking curves of LZO film on the CeO2-seed buffered NiW tape are ∆ ω = 3.4° in Figure 2a and ∆ φ = 5.5° in Figure 2b. This indicates that LZO film is preferentially c-axis-oriented and has excellent high out-of-plane and in-plane alignments. In Figure 2c, the fourfold symmetry in the LZO pole figure indicates a single cube-textured LZO film.

Figure 1 XRD θ -2 θ scans of LZO films prepared on three different buffered NiW tapes. The three different buffer architectures are curves (a) CeO2, (b) YSZ/CeO2, and (c) CeO2/YSZ/CeO2. Table 1 Texture analysis data of LZO films grown on three different Alectinib order buffer architectures   Out-of-plane texture ∆ ω (deg) In-plane texture ∆ φ (deg) LZO (004) + CeO2(002) YSZ (002) LZO (222) + CeO2(111) YSZ (111) LZO/CeO2/NiW 3.4   5.5   LZO/YSZ/CeO2/NiW 3.8 4.2 6.0 7.2 LZO/CeO2/YSZ/CeO2/NiW 3.5 4.2 6.1 7.2 Figure 2 Typical XRD patterns of LZO films. (a) ω-scan pattern, (b) φ-scan pattern, and (c) pole figure of LZO films grown on CeO2 buffered NiW tapes with the texture of ∆ ω = 3.4° and ∆ φ = 5.5°. xTo investigate the films deeply and broadly, the surface morphologies of LZO films fabricated on CeO2, CeO2/YSZ, and CeO2/YSZ/CeO2 buffered NiW tapes are observed by OM, SEM, and AFM. From optical photographs shown in Figure 3, it is demonstrated that the surface of all LZO films on CeO2, CeO2/YSZ, and CeO2/YSZ/CeO2 buffered NiW tapes are all flat without any island or particle in the area of 1 mm × 1 mm. Only a few grain boundaries are observed in the surfaces of LZO films.