34. Swami N, He H, Koel BE: Polymerization and decomposition of C 60 on Pt(111) surfaces. Phys Rev B 1999, 59:8283–8291.CrossRef 35. Andres H, Basler R, Blake AJ, Cadiou C, Chaboussant G, Grand CM, Güdel H-U, Murrie M, Parsons S, Paulsen C, this website Semadini F, Villar V, Wernsdorfer W, Winpenny REP: Studies of a nickel-based single-molecule magnet. Chem Eur J 2002,8(21):4867–4876.CrossRef

Competing interests The authors declare that they have no competing interests. Authors’ contributions AG and TV carried out the AFM measurements supervised by AB and UH. LS and KK carried out the XPS measurements supervised by KK. VH synthesized AZD0530 cost the SMMs supervised by TG. All authors read and approved the final manuscript.”
“Background Multijunction solar cells (MJSC) are instrumental in concentrated (CPV) and space photovoltaic systems.

The driving force for the material and technological development of MJSCs is the need for higher conversion efficiency. In CPV systems, the conversion efficiency is further increased owing to the use of concentrated light and therefore https://www.selleckchem.com/products/ganetespib-sta-9090.html any efficiency gain that can be made by using more suitable materials and advanced design would lead to significant gain in overall system efficiency. The record CPV efficiency for lattice-matched GaInP/GaAs/GaInNAsSb SC is 44% [1]. On the other hand, the best lattice-matched GaInP/GaAs/Ge exhibit a peak efficiency of 43.3% under concentration [2] and 34.1% at 1 sun [3]. Efficiencies as high as 50% have been predicted for cells with a larger number of junctions and high concentration [4]. To this end, a promising approach is to integrate dilute nitrides and standard GaInP/GaAs/Ge.

http://www.selleck.co.jp/products/Bortezomib.html Yet, so far, such heterostructures have exhibited low current generation [5]. The GaInNAs and GaInNAsSb solar cells reported in the literature have typically high bandgap voltage offsets (W oc), indicating poor junction properties [6, 7]. The offsets can be higher than 0.6 V, which is a rather high value when compared to GaInAs materials exhibiting a W oc of 0.4 V or even lower [4]. Recent studies on GaInNAs grown by molecular beam epitaxy (MBE) have demonstrated that by employing proper fabrication parameters [8–10], the W oc can be reduced below 0.5 V [11]. Another peculiar feature of GaInNAs solar cells is their shunt-like junction operation [6, 12]. This feature has been associated with clustering in GaInNAs due to phase separation of GaInNAs. Phase separation and shunt-like operation can also be avoided in MBE by the optimizing of the growth parameters [13]. In this paper, we focus on GaInNAsSb-based multijunction SCs, in particular on evaluating the practical bandgap and thickness limitations set by the subjunctions. Using realistic solar cell parameters for GaInNAsSb, based on the diode model and Kirchhoff’s laws, we estimate the efficiency of GaInP/GaAs/GaInNAsSb and GaInP/GaAs/GaInNAsSb/Ge solar cells.